Q系类

QiCSA subwoofer

QiCSA subwoofer
The QiCSA-SUB is a specifically designed version of the Qi-SUB for use as the rear facing element in Cardioid Subwoofer Arrays (CSA) only. It is acoustically compatible with the standard road version differing only in cabinet construction and mounting hardware. The QiCSA subwoofer cabinet is an actively driven bass-reflex design housing a long excursion 18" driver, its frequency response extending from 40 Hz to 130 Hz. The QiCSA-SUB cabinet is constructed from marine plywood and has an impact resistant paint finish. The loudspeaker cabinet has replaceable acoustically transparent foams fitted to both the front and rear sides of the cabinet, which are then protected by rigid metal grills. Four M10 threaded inserts on each side panel of the cabinet enclosure are provided for attaching installation hardware. Four rubber pads placed into their recessed positions prevent movement of the cabinets when two or more Qi and QiCSA-SUBs are stacked. The grill facing backwards is fitted with a single NL4 connector at the bottom left hand side. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options.



数据

组成部分
18" 驱动单元
最大声压级(1m, 自由场)1 with D6 / D12
129 / 133 dB SPL
额定功率 (RMS / 峰值 10 ms)
400 / 1600 瓦
频率响应 (-5 dB)
40 Hz - 130 / 1002 Hz
D6/D12每通道可驱动音箱数量
2 / 23
 
 
尺寸 毫米 (高 x 宽 x 深)
488 x 580 x 669
重量 公斤
37
尺寸 英寸 (高 x 宽 x 深)
19.2 x 22.8 x 26.3
重量 磅
81
·         1   最大峰值声压级测试信号:峰值因数为4的粉噪
·         2   100 Hz 模式
·         3   实际应用中,D12每通道在较低连续功率或低温环境下可推动多达3个同型号扬声器
上一篇:Qi-SUB 低音音箱 下一篇:没有了